4.CongurationSetup
4-6
TI 30A10A30-01E
4.3.2 Confirmsysteminformation(showsysinfo)
To confirm the system information of the Managed Switch, use “show sysinfo” command. The
“show sysinfo” command is available in “Privileged Exec” mode or “User Exec” mode.
A sample display of “show sysinfo” command execution is as shown below.
F040302.ai
(Hirschmann MACH) #show sysinfo
Last Alarm 1................................... Failure of Power Supply 2
Alarm 2........................................ None
System Description............................. Hirschmann MACH
System Name.................................... MACH-9EFA00
System Location................................ Hirschmann MACH
System Contact................................. Hirschmann Automation and Contro
l GmbH
System Up Time................................. 0 days 0 hrs 35 mins 25 secs
System Date and Time (local time zone)......... 2011-03-22 09:57:55
System IP Address.............................. 0.0.0.0
Boot Software Release.......................... 05.1.00
Boot Software Build Date....................... 2009-10-16 19:43
OS Software Release............................ L2P-06.0.01
OS Software Build Date......................... 2010-09-24 21:19
Backplane Hardware Revision.................... 1.02 / 15 / 0102
Backplane Hardware Description................. MACH104-20TX-FR
Serial Number (Backplane)...................... 942003101000001049
Base MAC Address (Backplane)................... 00:80:63:9e:fa:00
Number of MAC Addresses (Backplane)............ 64 (0x40)
Configuration state............................ OK
Auto Configuration Adapter, State.............. Not present
Auto Configuration Adapter, Serial Number...... <ACA not present or faulty>
--More-- or (q)uit
Power Supply P1, State......................... Present
Power Supply P2, State......................... Failed
Media Module Information: MACH104-20TX-FR
SFP Information :
Sup- Temp. TxPwr RxPwr RxPwr
Port Module Type Serial No. ported (deg C/F) (mW) (mW) State
---- ---------------- ---------------- ------ --------- ------ ------ -----
5 M-SFP-LX/LC PJ143B6 Yes 37 / 98 0.2675 0.0001 Alarm
CPU Utilization................................ 17%
Average CPU Utilization........................ 9%
Flashdisk (Kbytes free)........................ 5994
Figure Exampleof“showsysinfo”commandexecutiondisplay
Sep. 19, 2014-00