4.CongurationSetup
4-2
TI 30A10A30-01E
The following login message will be displayed after booting up when the terminal software is
correctly set. No line will be displayed on the terminal software if it runs after the boot up of the
Managed Switch. In such case, the login message is displayed by hitting the “Enter” key.
Key-in the following underlined characters in the login window.
User: admin
Password: private
F040102.ai
Copyright (c) 2004 - 2010 Hirschmann Automation and Control GmbH
All rights reserved
MACH Release L2P-06.0.01
(Build date 2010-09-24 21:19)
User:admin
Password: *******
System Name: MACH-FD5400
Mgmt-IP: 0.0.0.0
Base-MAC: 00:80:63:FD:54:00
System Time: 2011-03-20 20:56:29
Figure Login window
The CLI is automatically logged out after a long idle time. The default login timeout is set at five
minutes.
Log in again to continue operation once logged out.
Sep. 19, 2014-00