2-123
IM 04L51B01-17EN
Commands and Responses
2
M03:aaa…<crlf>
M04:aaa…<crlf>
M05:aaa…<crlf>
M06:aaa…<crlf>
M07:aaa…<crlf>
M08:aaa…<crlf>
M09:aaa…<crlf>
EN<crlf>
nn
Unit number
f
* Main unit
(Space) Expandable I/O or sub unit
aaa…
Outputs the relay (DO channel) status of module numbers 00 to 09.
If the module installed in the corresponding module number is not a DO module,
a hyphen is output.
If the module installed in the corresponding module number is a DO module, “1”
or “0” is output for the number of channels in the module in ascending order by
channel number.
“1” indicates relay (DO channel) ON state, and “0” indicates relay (DO channel)
OFF state.
If the DO terminal action (relay action) of a PID control module is set to “Contact
output within module,” the DO (relay) status is fixed to OFF.
2.10 ASCII Output Format
To Next Page
Loading...
Need help?
General
