YOKOGAWA GX10 User Manual

2-144
IM 04L51B01-17EN
2.10.20 SLMP Log (FLog)
The output in response to the command “FLog,SLMP” is shown below.
Syntax
EA<crlf>
yyyy/mo/dd_hh:mm:ss_xxxxxx_kkk…k_nnn_d<crlf>
…
EN<crlf>
yyyy/mo/dd_hh:mm:ss
Time of command Tx/Rx
yyyy
Year (1900 to 2099)
mo
Month (01 to 12)
dd
Day (01 to 31)
hh
Hour (00 to 23)
mm
Minute (00 to 59)
ss
Second (00 to 59)
xxxxxx
Occurred event
ACTIVE
Communication has been successfully
established and normal data has been
acquired.
READY_
Communication has been successfully
established but normal data has not
been acquired.
CLOSE_
TCP connection in progress.
HALT_ _
Communication has failed and has
entered a communication recovery wait
state
_ _ _ _
Other than those above
kkk…k
Detail
nnn
Command number (0 to 999)
d
Command type
R
Read
W
Write
O
Immediate write
N
Others
Detail Group Meaning
START Communication
status
SLMP was started.
STOP SLMP was stopped.
DROPOUT Command could not be processed within the specified
interval.
SKIP Command problem Command is not specified.
INVALID Command cannot be executed.
WAITING Communication
problem
Server communication recovery wait
CLOSED Server connection closed
RESOVING Server connection is being established (resolving
address).
CONNECTING Server connection is being established (requesting
connection).
UNREACH Server connection failed (peer not found).
TIMEOUT Server connection failed (timeout occurred).
ERROR Response problem System error occurred.
BROKEN Response message is corrupt.
BAD_HEAD Response message header error
BAD_LEN Response message size error
BAD_DATA Response message data error
ERROR:□□□□ Error response received (4-digit error number displayed
in the squares)
VALID Data condition Data is being acquired normally.
STALE Data is old.
2.10 ASCII Output Format

YOKOGAWA GX10 Specifications

General

Brand	YOKOGAWA
Model	GX10
Category	Voice Recorder
Language	English