YOKOGAWA GX10

2-168
IM 04L51B01-17EN
Output Example
EA<crlf>
PTNNO,5
SEGNO,10
SEGUSE,7
SEGTM,11:05:22
WAITTM,00:06:00
RPT-MODE,1
RPT-CNT,20
RPT-REM,2
RPT-START,3
RPT-END,6
STARTTM,17/05/03 10:00:00
ENDTM,17/05/05 10:00:00
EN<crlf>
2.10.36 PV event and time event information output (FPrgEvent)
The output in response to the command “FPrgEvent” is shown below.
Syntax
EA<crlf>
pp,xxx.xxx.xxx.xxx<crlf>
pp,yyy.yyy.yyy.yyy<crlf>
EN<crlf>
pp
Program pattern number (1 to 99)
xxx
The states of bits 31 to 24, 23 to 16, 15 to 8, and 7 to 0 are indicated in order
using decimal notation.
Bit 0
. 0
PV event 1 off
. 1
PV event 1 on
.
Bit 31
0
PV event 32 off
1
PV event 32 on
yyy
The states of bits 31 to 24, 23 to 16, 15 to 8, and 7 to 0 are indicated in order
using decimal notation.
Bit 0
. 0
Time event 1 off
. 1
Time event 1 on
.
Bit 31
0
Time event 32 off
1
Time event 32 on
Output Example
FPrgEvent,1
When PV event 1 and time events 2 and 3 are occurring
EA<crlf>
01,000.000.000.001<crlf>
01,000.000.000.006<crlf>
EN<crlf>
2.10 ASCII Output Format