2-172
IM 04L51B01-17EN
2.10.43 Instrument’s Option Installation Information (_OPT)
The output in response to the command “_OPT” is shown below.
Output Example
EA<crlf>
/C2,'RS-232'<crlf>
/C3, 'RS-422/485'<crlf>
/C8, 'Bluetooth'<crlf>
/D5, 'VGA output'<crlf>
/FL, 'Fail output (1 point) '<crlf>
/MT,'Mathematical function (with report function) '<crlf>
/MC, 'Communication channel function'<crlf>
/P1, '24 VDC/AC power supply'<crlf>
/UH, 'USB interface (Host 2 ports) '<crlf>
/AS, ‘Advanced security functions’<crlf>
/BT, ‘Multi-batch function’<crlf>
/AH, ‘Aerospace heat treatment’<crlf>
/E1, ‘EtherNet/IP communication’<crlf>
/E2, ‘WT connect functions’<crlf>
/E3, ‘OPC-UA server’<crlf>
/E4, ‘SLMP communication’<crlf>
/CG, ‘Custom display functions’<crlf>
/LG, ‘Log scale functions’<crlf>
/PG, ‘Program pattern’<crlf>
/U__0,'Model pre-installed with analog (universal) input
module(s)'<crlf>
/CR__,'Model pre-installed with digital output module(s) and/or
digital input module(s)'<crlf>
EN<crlf>
/C2
RS-232
/C3
RS-422/485
/C8
Bluetooth
/D5
VGA output
/FL
Fail output, 1 point
/MT
Math (including the report function)
/MC
Communication channel function
/P1
24VDC/AC power supply
/UH
USB interface (host 2 ports)
/AS
Advanced security function (Part 11 compliant)
/BT
Multi batch function
/AH
Aerospace heat treatment
/E1
EtherNet/IP communication
/E2
WT communication
/E3
OPC-UA server
/E4
SLMP communication
/CG
Custom display function
/LG
Log scale
/PG
Program control
/UX
1
X
2
0 Model pre-installed with analog (universal) input modules
X
1
Terminal type
S
Screw terminal
C
Clamp terminal
X
2
Number of analog (universal) input modules installed
1, 2, 3, 4, 5, 6, 7, 8, 9, A (where A represents 10)
/CRY
1
Y
2
Model pre-installed with digital output modules and/or digital input modules
Y
1
Number of digital output (C contact) modules installed
1,2,3,4,5
Y
2
Number of digital input modules installed
1,2
2.10 ASCII Output Format
To Next Page
Loading...
Need help?
General
