YOKOGAWA GX10 User Manual

2-155
IM 04L51B01-17EN
Commands and Responses
1
2
App
Operation Event string ### information and detailed information
The following settings (those that have
been changed among the following two
settings)
input Calibration correction value
output Output calibration value
Example:
0001:02:(output)=(1.234)->(2.234)
Save directory
change
SetDirectory (b1)->(a1)
Folder name
Example:
(DATA0)->(DATA1)
Recipient address
change
SetRecipient Recipient:l
l Recipient number [1, 2]
Example:
Recipient:1
Source address
change
SetSender —
Subject change SetSubject —
Login change SetLogin User:UUU
UUU User number
Schedule setting SetSchedule## ## Schedule number
(s,dd,ck,cy,bz,cc,t,1,2)=(b1,b2,b3,b4,b5,b6,b7,b8
,b9)->(a1,a2,a3,a4,a5,a6,a7,a8,a9)
b1,•••b9 Before change
a1,•••a9 After change
The following settings (those that have
been changed among the following eight
settings)
s On/Off
dd Date [yyyy/mo/dd]
ck Notification day [1 to 10]
cy Renotification interval [10min,
30min, 1h, 8h]
bz Notification buzzer [ON, OFF]
cc Load settings [ON, OFF]
t Title
1 Notification content 1
2 Notification content 2
However, the title before change,
notification content 1 before and after
change, and notification content 2 before
and after change are not output (spaces).
Example:
02:(s,ck,t,2)=(OFF,3,,)->(ON,4,’abc’,)
Correction coefficient
setting
SetCFactor cccc:pp:(uncorrected, instru,sensor)=(b1,b2,b3)-
>(a1,a2,a3)
c Channel
p Correction position
b1,b2,b3 Before change
a1,a2,a3 After change
The following settings (those that have
been changed among the following two
settings)
Uncorrected value (before and after
change)
Instrument correction coefficient (before
and after change)
Sensor correction coefficient (before and
after change)
Example:
0001:02:(sensor)=(1.234)->(2.234)
Change while recording is stopped
Setting change SetParameter ss•••:kk•••
2.10 ASCII Output Format

YOKOGAWA GX10 Specifications

General

Brand	YOKOGAWA
Model	GX10
Category	Voice Recorder
Language	English