2-51
IM 04L51B01-17EN
Commands and Responses
2
SLed
LED Indicator Operation [GX/GP]
Sets the operation of the LED indicators on the front
panel.
Syntax
SLed,p,p2
p1
Type (Function)
p2
Operation
Off
Power state
AlarmAll
Alarm
Query
SLed?
Example Set the LED indicator operation to “Alarm.”
SLed,Function,AlarmAll
SSound
Sound [GX/GP]
Sets touch and warning sounds.
Syntax
SSound,p1,p2
p1
Touch sound (Off, On)
p2
Warning sound (Off, On)
Query
SSound?
Example Enable touch and warning sounds.
SSound,On,On
SInstruTag
Instruments Tag
Sets tags.
Syntax
SInstruTag,p1,p2
p1
Tag (up to 32 characters, UTF-8)
p2
Tag number (up to 16 characters, ASCII)
Query
SInstruTag?
Example Set the tag to assign to the GX/GP to “GX” and
the tag number to “12345.”
SinstruTag,’GX’,’12345’
SConfCmt
Setting File Comment
Sets the setting file comment.
Syntax
SConfCmt,p1
p1
Setting file comment (up to 50 characters,
UTF-8)
Query
SConfCmt?
Example Set “SETTING FILE COMMENT.”
SConfCmt,’SETTING FILE COMMENT’
SUsbInput
USB Input Device [GX/GP]
Specifies the USB input device.
Syntax
SUsbInput,p1
p1
USB input device type
Japanese_109
Japanese keyboard
English_104
English keyboard
Barcode
Bar-code reader
Query
SUsbInput?
Example Specify the English keyboard.
SUsbInput,English_104
Description
• This command is valid on models with the /UH USB
interface option.
• For the communication commads that you can
execute using a bar-code reader, see section
1.18.11, “Setting USB Input Devices (/UH option)”
in the Model GX10/GX20/GP10/GP20 Paperless
Recorder User’s Manual (IM 04L51B01-01EN).
SSetComment
Configuration Changes Comment (/AS)
Sets whether to enter comments when settings are
changed.
Syntax
SSetComment,p1
p1
Enable/disable configuration changes
comment
On
Enter comments when settings are
changed.
Off
Do not enter comments when
settings are changed.
Query
SSetComment?
Example Enter comments when settings are changed.
SSetComment,On
2.4 Setting Commands
To Next Page
Loading...
Need help?
General
