YOKOGAWA PH450G

<1. General>
1-5
IM 12B07W01-04EN 1st Edition : Nov. 11, 2016-00
l Spare Parts
Description P/N Remarks
Fuse for power supply
box
A1109EF Rating: 1A (for pH/ORP converter only)
Polyethylene tubing L9901CA Specied length by meters
Fluoropolymer (PTFE)
tubing
L9901LG Specied length by meters
Polypropylene tting L9831NA
L9831NE
L9831JE
L-shape tting (R1/8)
L-shape tting (R1/4)f
I-shape tting (R1/4)
Fluoropolymer (PTFE)
tting
L9831TS
L9831TT
L-shape tting (R1/8)
L-shape tting (R1/4)
n PH8HS3 Holder
●Model and Sufx Codes
Model Sufx
code
Option
code
Specications
PH8HS3 - - - - - - - - - - - - - Holder for Chemical Cleaning
Material -PP - - - - - Polypropylene
Movement -03
-06
-10
-15
- - - - -
- - - - -
- - - - -
- - - - -
300 mm (with 2 mounting brackets)
600 mm (with 2 mounting brackets)
1000 mm (with 2 mounting brackets)
1500 mm (with 2 mounting brackets)
pH measuring
system
-C
-T
- - - - -
- - - - -
pH/ORP Converter
2-wire Analyzer
Cleaning system -YP - - - - - Acid or alkali solutions can be used.
Style code *C - - - - - Style C
Option /SC Cylinder cover for outdoor use *1
*1: For outdoor installation, select Cylinder cover /SC as Option.
l Accessories
(other than mounting brackets and sensor holder)
Description Qt'y Remarks
M8 x 16 mm bolts and nut
Washers
4/pkg
8
Parts for mounting brackets (used to mount to the
holder)
U bolts (M8)
Washers and nuts
2
4/pkg
Parts for mounting brackets
(used to mount to 2-inch pipe)
Rubber sheet (19 x 40 mm)
Plate
Clamp
M4, 16mm screw
1
1
1
1
Parts for sensor holder (used to x sensor cable)
Piping tting (polypropylene) 3 Parts for PH8SM3 holder (used for piping port)
Cable tie 5 For KCl supply tube/sensor cable
Spare gaskets (P/N: K9729WJ) 1 Parts for cleaning chamber of PH8HS3 holder
l Spare Parts
Description P/N Qt'y Remarks
Gasket K9729WJ
1 Material : EPDM
O-rings K9729YK
2 1p/pkg. Replace both of the two rings at the same time.