ii
IM 12B07W01-04EN 1st Edition : Nov.11, 2016-00
• No part of the user’s manuals may be transferred or reproduced without prior written
consent from YOKOGAWA.
• YOKOGAWA reserves the right to make improvements in the user’s manuals and product at
any time, without notice or obligation.
• If you have any questions, or you nd mistakes or omissions in the user’s manuals, please
contact our sales representative or your local distributor.
n Drawing Conventions
Some drawings may be partially emphasized, simplied, or omitted, for the convenience of
description.
Some screen images depicted in the user’s manual may have different display positions or
character types (e.g., the upper / lower case). Also note that some of the images contained in this
user’s manual are display examples.
n Inspection on delivery
Each component of Chemical Cleaning pH Measuring Systems comes in a separate package.
However, PH450G pH/ORP Converters (or FLXA202/FLXA21 2-Wire Analyzer ) are delivered
with factory-installed in PH8SM3 Chemical Cleaning pH Measuring Unit ,
After the delivery, open the package carefully and inspect for damages caused during transport.
Should there be any damage or breakage on the product, please contact YOKOGAWA
immediately and keep all the packing materials, containers and boxes that came with the
product.
After the unpacking, make sure the delivered products include all of the component equipment
you ordered.
After completing the unpacking, make sure that the delivered component covers all of the
required specications. When conrming the specications, refer to the model and sufx codes
indicated on the nameplate on the instrument. The models are indicated on the name plates.
Check also those of accessories. For further information on PH8SM3 or PH8HS3, please read
subsection 1.2 of this document.
l Unpacking and handling
When unpacking, place the instrument on a level surface in the position in which the instrument
will actually be installed, (Do not allow the package to undergo any intense mechanical shock by
turning it over on its side.) Avoid applying any excess force to the pipes and cables. Otherwise, a
defective pipe and / or cable connection may result
PH8SM3 Chemical Cleaning pH Measuring Unit weighs approximately 50 kg. It is recommended
that the product be unpacked as near your installation location as possible.
To Next Page
Loading...
