YOKOGAWA SMARTDAC+ GX10 User Manual

10
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 04L51B01-01EN Nov. 10, 2015-00
 SPECIFICATIONS OF OPTIONAL
FUNCTIONS
ADVANCEDSECURITYFUNCTION(/AS)
 Securityandelectronicrecord/signaturefunctions
havebeenaddedthatarecompliantwiththeUSA’s
FDAtitle21CFRPart11.
• Enabling/disablingtheadvancedsecurity
function:
You can enable or disable the advanced security
function.
* Thesetvaluesanddatastoredintheinternal
memoryareinitializedeachtimethefunctionis
enabled or disabled.
• Dataanti-tamperfunction:
Settings and measured data are saved as
encryptedbinaryles.
• Datatype:
 Onlyfordisplayorevent
Trigger mode is not possible with event data.
• Loginfunction:
 Usingtheloginfunctiondescribedbelow,you
can enter security settings on the instrument
• Username
• Password
• UserID(dependonsetting)
• Userlevelandnumberofusers:
System administrator (all can be operated),
Generaluser(Withuserrestrictions,
youcansetrestrictionsonperforming
operations and sign authority.), Monitor
user (monitoring only), totally 100 users
• Userrestrictionssetting:10kinds(for
general users)
• Passwordexpirationtime:
 selectformOff,1month,3month,6month
• Passwordcontrolfunction:
 LoginsareveriedbyaKerberosv5
authenticationserver*(onlyusernameand
password)
Encryption method:
AES128-CTS-HMAC-SHA1-96
AES256-CTS-HMAC-SHA1-96
ARCFOUR-HMAC-MD5
 Pre-Authfunction:use
* Thefunctionhasconrmedcompatibilitywith
WindowsServer2003SP2/WindowsServer2008
SP2/WindowsServer2012ActiveDirectory
• Signaturefunction:
 Aftercheckingdatathathasnishedbeing
recorded,youcanaddthreelevelsofelectronic
signature,selectapass/fail,andentercomments
(50charactersmaximum)
• Audittrailfunction:
The operation log, the settings change log and
thesettingslewhenthechangewasmadeare
saved.
SERIALCOMMUNICATIONINTERFACE(/C2,/C3)
• Connection:EIARS-232(/C2)orEIARS-
422/485(/C3)
• Protocol:Dedicatedprotocol,Modbus/RTU,or
DARWINcompatiblecommunication
• Setting/measurementserverfunction:Operation,
settingoroutputofmeasurementdataare
available by dedicated protocol.
• Synchronization:Start-stopsynchronization
• Transmissionmode(RS-422/485):
RS-422:Four-wirehalf-duplexmulti-drop
connection (1:n (n = 1 to 31))
RS485:Two-wirehalf-duplexmulti-drop
connection (1:n (n = 1 to 31))
• Baudrate:1200,2400,4800,9600,19200,
38400, 57600, or 115200 bps
• Datalength7or8bits
• Startbit:1bit
• Stopbit:1bitor2bit
• Parity:ODD,EVEN,orNONE
• HandshakingOff:Off,XON:XON,XON:RS,and
CS: RS
• Communicationdistance;RS-422/485:1200m,
RS-232: 15 m
• Modbus/RTUcommunication:Readingorwriting
ofmeasurementdataonotherinstrumentsis
available by Modbus protocol.
 Communicationchannelfunctionoption(/MC)
isneededtoreadmeasurementdatafromother
instruments.
• Operationmodes:Masterorslave
• Executionofacommunicationcommandusinga
barcode:Theenteredtextcanbeexecutedasa
communication command.
CUSTOMDISPLAY(/CG)
 UsingDXA170DAQStudio,screencreation
software,acustomscreencanbeconstructedand
displayed in which display components (such as
trend,digital,andbargraphs)arefreelyplaced.
 ThescreendataistransferredfromDAQStudioto
the internal memory via communication, or loaded
fromanexternalmediumtotheinternalmemory
and displayed.
• Numberofscreens:30(internalmemory)
• Displaycomponents:
• Normalcomponents(digitalvalue,bar
graph, tag No., tag comment, simple digital
value, simple bar graph, alarm mark, unit,
alarm indicator, lower-limit span value,
upper-limit span value, group name,
system icon, memory sample bar, date/time
view, batch name, and user name)
• Trendcomponents(trendgroupdisplay
(with scale board))
• Listcomponents(alarmlistviewand
message list view)
• Operationcomponents(DO(DOoperable),
internal switch (internal switch operable),
numeric value operations (viewing data
ofandwritingdatatocommunication
channels), and button operations (writing
numeric values, operating bits, switching
screens,andexecutingcommunication
commands)
• Textcomponents(labels)
• Figurecomponents(lineview,rectangle
view, and circle view)
• Imagecomponents(PNGimagedata)
• Batchcomponents(Batchnumber,Lot
number,Texteld,Batchcomment,Batch
groupnumber*)
* OnlyonGXwiththeMultibatchfunction(/
BT option)

YOKOGAWA SMARTDAC+ GX10 Specifications

General

Brand	YOKOGAWA
Model	SMARTDAC+ GX10
Category	Voice Recorder
Language	English