YOKOGAWA YTA610 - Page 69

<7. General Specications>
7-10
IM 01C50G01-01EN
Table 7.3 Sensor type, measurement range, and accuracy
Sensor Type Standard
Measurement Range
Minimum
Span
A/D Accuracy
D/A
Accuracy
°C °F °C °F
T/C
B
IEC60584
100 to 300
300 to 1820
212 to 572
572 to 3308
25°C
(45°F)
±3.0
±0.77
±5.4
±1.39
±0.03% of span
E
-200 to -50
-50 to 1000
-328 to -58
-58 to 1832
±0.4
±0.2
±0.72
±0.36
J
-200 to -50
-50 to 1200
-328 to -58
-58 to 2192
±0.35
±0.25
±0.63
±0.45
K
-200 to -50
-50 to 1372
-328 to -58
-58 to 2501
±0.5
±0.3
±0.9
±0.54
N
-200 to -50
-50 to 1300
-328 to -58
-58 to 2372
±0.5
±0.4
±0.9
±0.72
R
-50 to 0
0 to 600
600 to 1768
-58 to 32
32 to 1112
1112 to 3214
±1.0
±0.7
±0.5
±1.8
±1.26
±0.9
S
-50 to 0
0 to 1768
-58 to 32
32 to 3214
±1.0
±0.6
±1.8
±1.08
T
-200 to -50
-50 to 400
-328 to -58
-58 to 752
±0.35
±0.2
±0.63
±0.36
C
0 to 2000
2000 to 2300
32 to 3632
3632 to 4172
±0.7
±1.0
±1.26
±1.8
W3
ASTM
E988
0 to 400
400 to 1400
1400 to 2000
2000 to 2300
32 to 752
752 to 2552
2552 to 3632
3632 to 4172
±0.9
±0.6
±0.7
±1.0
±1.62
±1.08
±1.26
±1.8
L
DIN43710
-200 to -50
-50 to 900
-328 to -58
-58 to 1652
±0.35
±0.3
±0.63
±0.54
U -200 to 600 -328 to 1112 ±0.35 ±0.63
RTD
Pt100
IEC60751
-200 to 850 -328 to 1562
10°C
(18°F)
±0.14 ±0.25
Pt200 -200 to 850 -328 to 1562 ±0.25 ±0.45
Pt500 -200 to 850 -328 to 1562 ±0.18 ±0.324
Pt1000 -200 to 300 -328 to 1562 ±0.18 ±0.324
JPt100 — -200 to 500 -328 to 932 ±0.16 ±0.29
Cu10
SAMA
RC21-4
-70 to 150 -94 to 302 ±1.3 ±2.23
Ni120 — -70 to 320 -94 to 608 ±0.14 ±0.25
mV — -10 to 120 [mV] 3 mV ±0.015[mV]
ohm — 0 to 2000 [Ω] 20 Ω ±0.45 [Ω]
Note 1: Total Accuracy = (A/D Accuracy / Span + D/A Accuracy) or (± 0.1% of calibrated span), whichever is greater.
Accuracy of Fieldbus type: A/D Accuracy.
For T/C input, add Cold Junction Compensation Error (± 0.5°C) to the total accuracy.
Example: when selecting Pt100 with measurement range of 0 to 400 °C
0.14°C / 400°C×100% of span +0.03% of span = 0.065% of span
Since the value is smaller than ±0.1% of span, the total accuracy is ±0.1%.
Note 2: T/C C type is same as W5 (ASTM E988).