<2.Specications>
2-17
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
•
• Burn out signal according to NAMUR NE43.
in 1 vol%O
, or partial range is
available.
O, or partial range is available.
available.
.
• With no power supply (option)
Digital Communication
m (38400/9600 bps) grounding the shield
Contact Output:
• For DO-1/DO-2/DO-3, select either one, normally energized (normally closed) or normally
de-energized (normally open) status. (Open when power is on.)
Range switching answer-back, Warm-up, Calibration gas pressure decrease (answer-back of
contact input), Temperature high alarm, Blowback start, Flameout gas detection (answer-back
Contact Input:
• No-voltage contact input
• Transistor contact input
start, Reboot
Automatic Calibration Output: Two points (for dedicated automatic calibration unit ZR40H only)
Environmental condition:
Power Consumption: Max. 800 VA, approx. 330 VA for ordinary use.
Power supply 100V AC: Max. 160 VA (160 W), approx. 120 VA (approx. 100 W) for ordinary
use
Power supply 230 V AC: Max 550 VA (370 W), approx. 260 VA (approx. 100 W) for ordinary
use
To Next Page
Loading...
Need help?
General
