JOHNSON CONTROLS
51
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
FORM 160.67-O1
ISSUE DATE: 4/1/2015
2
PROGRAMMABLE
Manual Pump (Disabled/Enabled)
Access Level Required: OPERATOR
This key puts the auxiliary oil pump control in the
Manual Mode and forces it to RUN. The oil pump is
limited to running ten (10) minutes. If a longer running
time is desired, this key must be pressed again. Manual
Pump control is disabled (and the key hidden) during
system prelube, system run, and system coastdown.
This object only appears if the MSSP6-Turbine Lubri-
cation Type is set for Pump on Configuration Screen 1.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
System
Access Level Required: VIEW
Causes an instant return to the Steam System Screen.
To Next Page
Loading...
