JOHNSON CONTROLS
160
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
APPENDIX - MATERIAL SAFETY DATA SHEETS
CEFSHP62
Du Pont
Material Safety Data Sheet
Page 6
Printed on 03/09/2011
Color : Clear, colorless
Specific Gravity : 1.05 @ 25C (77F)
----------------------------------------------------------------------
STABILITY AND REACTIVITY
----------------------------------------------------------------------
Chemical Stability
Material is stable. However, avoid open flames and high
temperatures.
Incompatibility with Other Materials
Incompatible with active metals, alkali or alkaline earth
metals--powdered Al, Zn, Be, etc.
Decomposition
Decomposition products are hazardous. This material can be
decomposed by high temperatures (open flames, glowing metal
surfaces, etc.) forming hydrofluoric acid and possibly carbonyl
fluoride.
These materials are toxic and irritating. Contact should be
avoided.
Polymerization
Polymerization will not occur.
----------------------------------------------------------------------
TOXICOLOGICAL INFORMATION
----------------------------------------------------------------------
Animal Data
The blend is untested.
HFC-125
Inhalation 4 hour ALC: > 709,000 ppm in rats
Single, high inhalation exposures caused lethargy, decreased
activity, labored breathing and weight loss. Weak cardiac
sensitization effect, a potentially fatal disturbance of
heart rhythm caused by a heightened sensitivity to the
action of epinephrine. Lowest-Observed-Adverse-Effect-Level
for cardiac sensitization: 100,000 ppm.
Repeated exposure caused: No significant toxicological
effects. No-Observed-Adverse-Effect-Level(NOAEL): 50,000 ppm
No animal data are available to define carcinogenic,
developmental or reproductive hazards. In animal testing
this material has not caused developmental toxicity.
HFC-125 does not produce genetic damage in bacterial or
Print Date: 3 - 10 - 2011
To Next Page
Loading...
