York YZ MODEL A - FIGURE 6 - Home Screen

JOHNSON CONTROLS
30
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
FIGURE 6 - HOME SCREEN
LD26728
DISPLAY ONLY FIELDS
DISPLAY ONLY FIELDS
FIELD/LED NAME DESCRIPTION
Chilled Liquid Temperature - Leaving Displays the temperature of the liquid as it leaves the evaporator.
Chilled Liquid Temperature - Entering Displays the temperature of the liquid as it enters the evaporator.
Condenser Liquid
Temperature - Leaving
Displays the temperature of the liquid as it leaves the condenser.
Condenser Liquid
Temperature - Entering
Displays the temperature of the liquid as it enters the condenser.
Input % Full Load Amps This displays the percentage of full load amps utilized by the system.
Input Power (kW) This displays the total input power used by the system.
Operating Hours Displays the cumulative operating hours of the chiller.
Motor Run (LED) Is ON when the digital output that gives the VSD a motor run command is on.
PROGRAMMABLE
PROGRAMMABLE
BUTTON ACCESS LEVEL DESCRIPTION
Login VIEW
This key allows the user to change Access Level when the proper password is
entered at the prompt.
Logout OPERATOR
This key is displayed when a user is logged in at any level other than VIEW.
Pressing it will return the access level to VIEW.
When the chiller system is powered on, the above de-
fault display appears. The Home Screen display depicts
a visual representation of the chiller itself. Animation
indicates chilled liquid flow and/or condenser cooling
liquid flow when the flow switch inputs are satisfied.