York YZ MODEL A - FIGURE 26 - Printer Screen

JOHNSON CONTROLS
68
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
FIGURE 26 - PRINTER SCREEN
LD26747
This screen allows definition of the desired printer type
and print interval.
DISPLAY ONLY FIELDS
DISPLAY ONLY FIELDS
FIELD/LED NAME DESCRIPTION
Time Remaining Until Next Print Displays the time until the next print log will occur, if the function is enabled.
PROGRAMMABLE
PROGRAMMABLE
BUTTON ACCESS LEVEL DESCRIPTION
Automatic
Printer Log-
ging (Enabled/
Disabled
Operator
Enable the printer to begin printing status reports be-ginning at the programmed
start time and recurring at the interval dened above.
Log Start Time Operator Set the time at which scheduled print logs will begin.
Output Interval Operator Dene the interval at which log printing will occur.
Printer Type Operator Dene the printer type connected to the chiller system.
Print Report Operator
Select the report type to print when the Print Report key is selected. This can
vary from Status report (present system parameters), Setpoints report (present
value of the system setpoints), Schedule report (present value of the system
schedule times), or a Sales Order Data report (information provided on the Sales
Order screen), list of Slot Numbers or a Custom Data report. A print report is
generated upon completion of selection.
Print All
Histories
Operator
Generate a report of the system data at the time of all stored shutdowns`