York YZ MODEL A - FIGURE 25 - Comms Screen

JOHNSON CONTROLS
67
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
3
FIGURE 25 - COMMS SCREEN
LD26746
PROGRAMMABLE
PROGRAMMABLE
BUTTON ACCESS LEVEL DESCRIPTION
Chiller ID Operator
Dene the numeric chiller ID when used within an BAS network of chillers. This
ID number is also printed at the top of reports obtained with a local printer.
Printer Setup Operator
Pressing either key places a green selection box around the rst changeable
parameter. Use the ▲ and ▼ keys to place the selection box around the desired
parameter to be changed. With the selection box around the desired parameter,
press the ENTER "" key. A dialog box is displayed permitting data entry.
Printer Baud
Rate
Operator
Dene the baud rate at which the panel shall communicate to the printer.
Printer Data
Bit(s)
Operator
Dene the number of data bits with which the panel shall communicate to the
printer.
Printer Parity
Bit(s)
Operator
Dene the number of parity bits with which the panel shall communicate to the
printer.
Printer Stop
Bit(s)
Operator
Dene the number of stop bits with which the panel shall communicate to the
printer.
NAVIGATION
NAVIGATION
BUTTON DESCRIPTION
Home Causes an instant return to the Home Screen.
Setup Return to the previous Setup Screen.
This screen allows definition of the necessary commu-
nications parameters. See SECTION 6 - PRINTING of
this manual for details on the Printer connections and
setup. COM 2 communications features are automati-
cally set and can not be adjusted.