91
Printer Configuration and Adjustment
Changing Printer Settings
7/3/13 P1056468-002
Print
Information
Print the specified information on one or more labels.
• FONTS—Prints the available fonts in the printer, including standard printer fonts
plus any optional fonts. Fonts may be stored in RAM or Flash memory.
• BAR CODES—Prints the available bar codes in the printer. Bar codes may be stored
in RAM or Flash memory.
• IMAGES—Prints the available images stored in the printer’s RAM, Flash memory,
or optional memory card.
• FORMATS—Prints the available formats stored in the printer’s RAM, Flash
memory, or optional memory card.
• SETUP—Prints the printer configuration label.
• NETWORK—Prints the settings for any print server that is installed.
• ALL—Prints the previous six labels.
Related ZPL command(s):
Printer configuration: ~WC
Network: ~WL
Others: ^WD
SGD command used: none
Control panel menu item:
LIST FONTS on page 25
LIST BAR CODES on page 25
LIST IMAGES on page 25
LIST FORMATS on page 25
LIST SETUP on page 25
LIST NETWORK on page 26
LIST ALL on page 26
Printer web page:
View and Modify Printer Settings >
Print Listings on Label
Print a Sensor
Profile
Shows the sensor settings compared to actual sensor readings.
To interpret the results of the sensor profile, see Sensor Profile on page 156.
Related ZPL command(s):
~JG
SGD command used: none
Control panel menu item:
SENSOR PROFILE on page 26
Printer web page:
View and Modify Printer Settings >
Print Listings on Label
Initialize Flash
Memory
This option erases all previously stored information from Flash memory.
Caution • This option completely erases the Flash memory.
Related ZPL command(s):
^JB
SGD command used: none
Control panel menu item:
INIT FLASH MEM. on page 26
Printer web page:
View and Modify Printer Settings > Advanced
Setup > Format Memory
Table 8 • Maintenance and Diagnostic Tools (Continued)
To Next Page
Loading...
Need help?
General
