EasyManua.ls Logo

Zebra WT6300 - Page 44

Zebra WT6300
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications
44
Unknown - See system administrator.
Charge Status
Charging-AC - The device is connected to AC power and charging.
Charging-USB - The device is connected to a host computer with a USB cable and charging.
Discharging - The battery is discharging.
Full - That the battery is fully charged.
Unknown - The battery status is unknown.
Time until Full - The amount of time until the battery is fully charged.
Time since charging - The amount of time since the device began charging.
Time until empty - The amount of time until the battery is empty.
Advanced info - Touch to view additional battery information.
Battery present status - Indicates that the battery is present.
Battery level - The battery charge level as a percentage of scale.
Battery scale - The battery scale level used to determine battery level (100).
Battery voltage - The current battery voltage in millivolts.
Battery temperature - The current battery temperature in degrees Centigrade.
Battery technology - The type of battery.
Battery current - The average current into or out of the battery over the last second in mAh.
Battery manufacture date - The date of manufacture.
Battery serial number - The battery serial number. The number matches the serial number printed
on the battery label.
Battery part number - The battery part number.
Battery decommission status - Indicates if the battery is past its life span.
Battery Good - The battery is in good health.
Decommissioned Battery - The battery is past its useful life and should be replaced.
Base cumulative charge - Cumulative charge using Zebra charging equipment only.
Battery present capacity - Maximum amount of charge that could be pulled from the battery under
the present discharge conditions if the battery were fully charged.
Battery health percentage - With a range from 0 to 100, this is the ratio of “present_capacity” to
“design_capacity” at a discharge rate of “design_capacity”.
% decommission threshold - The default % decommission threshold for a gifted battery as 80%.
Battery present charge - Amount of usable charge remaining in the battery at present under the
current discharge conditions.
Battery total cumulative charge - The total accumulated charge in all chargers.
Battery time since first use - The time passed since the battery was placed in a Zebra terminal for
the first time.
Battery error status - The error status of the battery.
App version - The application version number.

Table of Contents

Other manuals for Zebra WT6300

Related product manuals