Data Capture
61
Pairing the RS507/X or RS6000 Hands-Free Imager
To connect the RS507/X or RS6000 imagers to the device, use one of the following methods:
• Near Field Communication (NFC) (RS6000 only)
• Simple Serial Interface (SSI)
• Bluetooth Human Interface Device (HID) Mode.
Pairing Using Near Field Communication
The device provides the ability to pair the RS6000 using NFC.
NOTE: RS6000 only.
1. Ensure that the RS6000 is in SSI mode. Refer to the RS6000 User Guide for more information.
2. Ensure that NFC is enabled on the device.
3. Align the NFC icon on the RS6000 with the NFC icon on the device.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
device. When connection is established, the Status LED turns off and the RS6000 emits a single string
of low/high beeps.
A notification appears on the device screen and the icon appears in the Status bar.
NOTE: Not all Zebra devices support NFC readers and the Tap-to-Pair feature.
1 NFC logo
1
To Next Page
Loading...