Zebra WT6300 - Battery Charging; Main Battery Charging; Spare Battery Charging

Accessories
82
Battery Charging
Main Battery Charging
To charge the main battery:
1. Ensure that the cradle is connected to power.
2. Slide the device into the slot in the cradle. The device Charge LED Indicator, indicates the mobile
computer battery charging status.
3. Gently press down on the device to ensure proper contact.
4. When charging is complete, remove the device from the cradle slot.
Spare Battery Charging
To charge the spare battery:
1. Connect the charger to a power source.
2. Insert the battery into a spare battery charging slot and gently press down on the battery to ensure
proper contact. The spare battery charging LEDs on the front of the cradle indicates the spare battery
charging status.
3. When charging is complete, remove the battery from the charging slot.
Power Supply PWRS-14000-241R Provides power to the 5-Slot Charge Only
Cradle, 5-Slot Ethernet Cradle, 5-Slot
Charge Only Cradle with Battery Charger
and the 5-Slot Ethernet Cradle with Battery
Charger. Requires DC Line Cord, p/n
50-16002–029R and country specific
grounded AC line cord.
Miscellaneous
Screen Protectors MISC-WT6X-SCRN-01 Provides additional protection for display
(5-pack).
Soft Goods
Hip Mount SG-NGWT-HPMNT-01 Provides mounting the device on a belt.
Wrist Mount
(Small/Medium)
SG-NGWT-WRMTS-01 Replacement strap.
Wrist Mount
(Medium/Large)
SG-NGWT-WRMTL-01 Replacement strap.
Spare Straps
(Small/Medium)
SG-NGWT-WSTPST-01 Replacement strap.
Spare Straps
(Medium/Large)
SG-NGWT-WSTPLN-01 Replacement strap.
Spare Comfort Pad SG-NGWT-CMPD-01 Replacement Comfort Pad for the Wrist
Mount.
Table 14 Accessories (Continued)
Accessory Part Number Description