Zebra WT6300 - Operational Modes; RS4000 Ring Scanner; RS5000 Ring Scanner

Data Capture
53
Operational Modes
The optional imager supports two modes of operation. Activate each mode pressing the Scan button.
• Decode Mode: In this mode, the imager attempts to locate and decode bar codes within its field of
view. The imager remains in this mode as long as the user holds the scan button, or until it decodes a
bar code.
NOTE: To enable Pick List Mode use DataWedge. Pick List can also be set in an application using a API
command.
• Pick List Mode: This mode allows the user to selectively decode a bar code when more than one bar
code is in the imager’s field of view. To accomplish this, move the aiming crosshair center dot over the
required bar code to decode only that bar code. This feature is ideal for pick lists containing multiple bar
codes and manufacturing or transport labels containing more than one bar code (either 1D or 2D).
RS4000 Ring Scanner
The RS4000 ring scanner is a modular, wearable laser scanner that allows the operator hands-free bar
code scanning capability.
Figure 18 RS4000 Ring Scanner
Refer to the RS4000 Ring Scanner Quick Start Guide for more information.
RS5000 Ring Scanner
The RS5000 ring scanner is a modular, wearable imager scanner that allows the operator hands-free bar
code scanning capability.
Figure 19 RS5000 Ring Scanner