38
ZQ220 User Guide
Keep-Out Areas
At times, incomplete printing of text and/or graphics appear
because minimum margins are not provided during label design.
The recommended minimum margins, or “keep out areas” are
shown in Figure 14.
Figure 14 • Keep Out Areas
0.59 in.
(15 mm)
* *
*
*
*
*
Receipt Paper with Black Bars
* Maintain a minimum “keep out area” of
1/16 in. (1.59 mm) from the two outer edges
of the paper roll and from the black bars.
Continuous Receipt Paper
(without Black Bars)
* Maintain a minimum “keep out area” of
1/16 in. (1.59 mm) from the two outer edges
of the paper roll.
Note • The length of each “continuous” receipt is determined by the data sent
to the printer.
Near Field Communication (NFC)
Devices using NFC may be active or passive. A passive device,
such as a ZQ220 printer with an NFC tag, contains information that
other devices can read but does not read any information itself. An
active device, such as a smartphone, can read the information on
the printer’s NFC tag, but the tag itself does nothing except transmit
the info to authorized devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
