Zebra ZQ220 - Introduction to the ZQ220 Printer

8
ZQ220 User Guide
Introduction to the ZQ220 Printer
This user guide gives you the information you will need to
operate the ZQ220 Mobile Printer. The printer uses some of the
latest technologies such as USB charging (Type-C connector),
an embedded Dual Mode Bluetooth 2.1 + EDR/4.1 Low Energy
module, Near Field Communication (NFC) and Made for iPhone
®
(MFi). MFi printers provide Apple co-processor (MFi) support which
allows an Apple device such as an iPhone or iPad
®
to authenticate
and connect over Bluetooth
®
.
This printer uses CPCL programming language. To create and
print labels using this language, refer to the Programming Guide
for CPCL (p/n P1073699-001). See “Appendix G” on page 62 for
instructions on how to access manuals on zebra.com.
ZQ220 Software Utilities:
• ZebraNet Bridge Enterprise™: printer conguration, eet
management
• Zebra Setup Utility: single printer conguration, quick setup
• ZebraDesigner Pro v2: label design
• ZebraDesigner Drivers: Windows
®
driver
• OPOS Driver: Windows driver
• Legacy SDK (part of Multiplatform SDK that supports limited
legacy freatures.)
These utilities can be found on the Zebra website at
http://www.zebra.com/support. (See “Appendix G” on page 62.)