40
ZQ220 User Guide
Wearing the Printer
Swivel Belt Clip
The ZQ220 printer has a plastic swivel belt clip included as a
standard feature.
To install or remove the belt clip:
1. Remove the battery pack.
2. Slide the belt into the slot on the bottom of the printer.
3. Reinstall the battery pack.
To use the belt clip:
Hook the belt clip over your belt, and ensure that the clip is securely
attached to the belt. The belt clip will pivot to allow you to move
freely while wearing the printer.
Figure 16 • Printer with Belt Clip
Belt Clip
To Next Page
Loading...