21
ZQ220 User Guide
Loading Media in the Printer
Loading Media Procedure
Press the Latch Release Lever on the side of the printer as shown in
“1” below. The Media Cover will open automatically.
Rotate the Media Cover back completely as shown in “2”, exposing
the media compartment.
Figure 3 • Opening the Printer
1
Latch
Release Lever
Media
Cover
Media
Compartment
Note • The printers also have the option to use media spacers
(p/n KIT-MPV-MD3SPR1-5) which are placed in the media compartment
and allow the printer to accept 76.2 mm (3 in.), 58 mm (2.3 in.) and 50.8
mm (2 in.) wide paper.
To Next Page
Loading...