Zeiss Auto Focus

To Next Page

To Previous Page

CONTENTS

Auto Focus equipment Carl Zeiss

06/2013 425131-7044-001 5

5.5 Other fault events ........................................................................................................ 35

5.6 Service ......................................................................................................................... 36

6 INTELLECTUAL PROPERTY ......................................................................................... 37

7 INDEX ......................................................................................................................... 38

Main Page

Table of Contents4
Introduction7
Notes Regarding Operational Safety7
Warning and Information Labels10
Notes on Warranty10
Fig. 1 Warning and Information Labels10
Product Description11
Product Designation, Intended Use11
Restrictions11
General View of Components12
Fig. 2 General View of Auto Focus Components12
Compatible Objectives for Use with Auto Focus13
Selectable Stages15
Functionality16
Fig. 3 Function Diagram of Auto Focus16
Fig. 4 Auto Focus Working Modes16
Technical Data17
Dimensions and Weight17
Ambient Conditions17
Operating Data18
Installation19
Connecting Auto Focus19
Fig. 5 Connection Diagram for Auto Focus and Controller to the Axio Imager 2 Stand19
Fig. 6 Auto Focus Sensor Module20
Fig. 7 Rear View of Controller and Connections20
Camera Deflection21
Auto Focus Objectives21
Insert Damping Filter21
Fig. 8 Manual Camera Deflection (425103-0000-000) for Left Side Port21
Operation22
Switching On/Off22
Fig. 9 Front View of Controller22
Setting up Auto Focus23
Fig. 10 TFT Display, Home Screen with Auto Focus Status23
Fig. 11 TFT Display, Auto Focus Settings23
Fig. 12 TFT Display, Microscope / Xyz / Auto Focus / Options / Period24
Auto Focus Operation Via the TFT Display27
Fig. 13 TFT Display, Options in the Auto Focus Tab27
Activate / Deactivate Auto Focus28
Fig. 14 Display Forms of the Status Icons for Auto Focus on the TFT Display in on / Standby Status (Left and Central) and Visualization of Error Messages28
Auto Focus in "On" and "Once" Status29
Auto Focus in "Standby" Status29
Set Load Position30
Setting Focus Reference Values31
Maintenance, Replacement of Fuses and Service32
Maintenance32
Replacement of Fuses in the Fc12 Auto Focus Controller32
Fig. 15 Replace the Fuses in the Controller32
Troubleshooting33
Error Messages and Typical Background Situations34
Other Fault Events35
Service36
Intellectual Property37
Index38

Zeiss Auto Focus - Page 5

Table of Contents

Related product manuals