OPERATION
Axio Observer Operating and function controls - overview ZEISS
12/2016 431004-7244-001 83
Key to Fig. 62:
1 Standby button (see page 84)
2 Left sideport (see page 84)
3 Coarse / fine focus drive (left side) (see page 84)
4 Control ring, left (see page 95)
5 Microscope stage (with inserted K mounting frame for reflected light and stage pinhole aperture)
6 Slot F for iris diaphragm slider as reflected light luminous-field diaphragm (manual or motorized) (see page 89)
7 Slot for Polarizer slider RL 6x30 mm, 90° rotatable
8 Slot A for aperture diaphragm slider MAT or FL attenuator (manual or motorized) (see page 89)
9 Slot for 3-position filter slider, d=25 mm (see page 88)
10 LM-Set button (see page 92)
11 Drive knobs for controlling XY positioning of the mechanical stage (see page 89)
12 Right sideport
13 6-position nosepiece HD DIC M27 mot. ACR (motorized) (see page 85)
14 Slot 6x20 for C-DIC and TIC slider
15 Slot for DIC slider
16 Reflector turret (coded or motorized) (see page 90)
17 Coarse / fine focus drive (motorized) with finger wheel for fine focus, flat (right side) (see page 90)
18 Control ring, right (see page 94)
19 TFT display (see page 93)
20 RL button for switching the LED / HAL illuminator or the reflected light shutter (fluorescence) on and off (see page 90)
21 Control wheel for LED / halogen illuminator illumination intensity control (see page 90)
22 Frontport
23 Binocular tube (see page 91)
24 Binocular section of tube (see page 92)
25 Eyepiece (see page 92)
26 Eyepiece focusing ring (see page 92)
To Next Page
Loading...
