Zeiss Axiovert 5 digital - Assembling the Object Guide and Mounting Frame to the Stage

4
Installation | 4.7 Assembling the Object Guide and Mounting Frame to the Stage
ZEISS
4
.7 Assembling the Object Guide and Mounting Frame to the Stage
Info
The object guide can be mounted to the right or to the left side of the stage.
Procedure 1. Set the object guide onto the stage.
2
3
4
. Tighten the three knurled screws to fix the ob-
ject guide from below.
. Slide the mounting frame Flex M into the ob-
ject guide until it snaps into place.
. If required, put a mounting frame insert onto
the mounting frame and fix it with the sliders.
2
8
Instruction Manual ZEISS Axiovert 5 digital | en-US | Rev. 1 | 431030-7021-101