Zeiss Axiovert 5 digital - Operation during Experiments; Switching Off the Microscope

5
Operation | 5.5 Operation during Experiments
ZEISS
5
.5 Operation during Experiments
Prerequisite ü The microscope is operational.
Procedure 1. Place the sample on the stage.
2
. Select the required objective.
3
. Focus the sample.
4
. If applicable, rotate a reflector module on the
reflector turret into the beam path. Watch for
the correct locking position.
5
.6 Switching Off the Microscope
Procedure 1. Close the Labscope software.
2
3
. Switch off the Apple® iPad Pro® or the Windows Surface Pro.
. Set the Power switch to position O.
4
. Cover the microscope with the dust cover.
3
6
Instruction Manual ZEISS Axiovert 5 digital | en-US | Rev. 1 | 431030-7021-101