Zeiss Stemi 508 - Wearing Parts; Service

Ste
reo microscope CARE, MAINTENANCE AND SERVICE
Stemi 508 Service ZEISS
01/2015 435064-7044-001 39
5.2.4 Wearing parts
The following wearing parts can be ordered directly from ZEISS:
Description Order No. Remark
Transparent glass plate, d = 84 mm 435425-9310-000
S/W plastic plate, d = 84 mm 435425-9320-000
Eyepiece PL 16x/16 Br foc. 444054-9000-000
Eyepiece cup 444801-0000-000 required 2x
Eyepiece 16x/14 Br foc. 435063-9160-000
Eyepiece W 25x/10 foc. 455046-9901-000
Set of small components
consisting of:
- 2x spiral cables RJ 12
- 1x cable RJ 12, length 1 m
- 2x caps, eyepiece
- 1x cap, microscope body
- 1x Allen key, SW 3
- 1x M6 clamping screw, microscope mount
- 2x M6 clamping screws for C mount
- 2x rubber rings, eyepiece
Protective dust cover, stand K 415500-1800-000
Cover, C-mount Stemi 305 trino
5.3 Ser
vice
All interventions in mechanical, optical and electronic internal microscope components may only be
performed by Carl Zeiss Service or by specifically authorized qualified staff.
To ensure your microscope is optimally set and also operates correctly over an extended period of time,
we recommend that you conclude a service/maintenance contract with ZEISS.
For reordering or in case of service, contact your nearest regional ZEISS representative.