11
EN
1
Unplug the cables of the Microinverter and the home grid.
2
Only unplug the cables of the rst solar panel and the Microinverter.
Tips: The installation of the solar panel does not need to be moved unless
you want to change the location.
3
The same way to unplug the cables of the second solar panel and the
Microinverter.
4
Unscrew the mounting screws of the Microinverter, remove the
Microinverter xed on the solar panel or metal bracket.
Tips: Ensure that the state after disconnection is as shown in following
gure.
If you have installed the balcony solar system, you need to disconnect it
according to the following steps:
1
2
3
4
To Next Page
Loading...
General