By default, clicking on a playback fader in the faders window, will open
that playback's settings.
Rather than pressing on an on-screen playback and opening that
playback's settings, you can instead configure pressing an on-screen
fader to match that playback's button function, or use the on-screen
fader to change the fader level by dragging. This is particularly useful if
you are viewing the faders desktop via the ZerOS Monitor app on a
tablet.
This can be configured from Setup -> Settings , and using the MFF
Window playback action option under Operational.
On FLX, the top four buttons running across the top of the Faders
window, show what your UDKs are currently doing.
On Solution consoles, click the Submasters button to open the Faders window. This will show you the current
functionality of the playback faders.
Zero 88 - ZerOS - Page 37 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
