Once the fixture's parameters are at the levels you wish to become the
fixture's home, you can press Record, and then tap Home. You can
then choose Home from the window that opens.
As this is a normal record command, this means that normal Record options apply. The Record Options can be
opened on the internal touchscreen by pressing and holding Record. In most cases when customising Home values,
you will need to ensure that the SmartTag option in the Record Options is disabled.
For information on how to do this, see the programming section.
Removing Custom Home Values
To remove custom default values, and revert back to the console
defaults, tap Delete Home, and then choose Home. This action can't
be undone.
Max Level
Parameter Max Levels
The Max Level (or, “topset”) for each parameter is the maximum value which can be reached when adjusting the
fixture using the wheels, command line, etc. This is set to a default value of 100%, meaning you have full control of
every parameter.
Custom Max Levels
The Max Level values can however be edited for individual fixtures, or groups of fixtures as required, to allow you to
customise the maximum level a parameter can go to. Useful if you only want a dimmer channel to go to 50% for
example.
You can do this, by firstly adjusting the fixture's parameters to the maximum values you wish them to be able to go to.
For information on how to adjust parameters, see each of the attribute sections for Intensity, Colour, Beam, Shape and
Position.
Once the fixture's parameters are at their maximum levels, you can
press Record, and then tap Home. The Home button is found top left
of the internal touchscreen on FLX and FLX S consoles, however
Home is an icon on the touchscreen on FLX S, whereas Home is a
physical button on FLX. You can then choose Max Level from the
window that opens.
Zero 88 - ZerOS - Page 81 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
