Selecting fixtures with syntax
You can use syntax commands, to select the fixtures you wish to view and edit in the Fixture Schedule. Syntax
commands are typed into the command line, running along the bottom of the fixture schedule window.
You can use the And , Thru and Except keys, to select multiple fixtures at once. Some examples:
1 Enter
1,
This selects fixture 1.
2 And 3 Enter
2, And 3,
This selects fixtures 2 and 3.
5 Thru 1 0 Enter
5 Thru 10,
This selects fixtures 5 through to 10.
5 Thru 1 0 Except 7 Enter
5 Thru 10, Except 7,
This selects fixtures 5, 6, 8, 9 and 10.
3 Thru 9 Except 5 Except 6 Enter
3 Thru 9, Except 5, Except 6,
This selects fixtures 3, 4, 7, 8 and 9. Note how Except is used twice to exclude two different channels from the range.
1 Thru 3 And 7 Thru 9 Enter
1 Thru 3, And 7 Thru 9,
This selects fixtures 1, 2, 3, 7, 8, and 9.
1 And 7 Thru 1 2 Except 9 Enter
1, And 7 Thru 12, Except 9,
This selects fixtures 1, 7, 8, 10, 11 and 12.
Zero 88 - ZerOS - Page 47 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
