Zeta SmartConnect - Page 70

Smart Connect Single Loop Touch Screen Panel
Doc: GLT-229-7-1 70
Issue: 3
Date: 12/05/2017
Press the exit icon to leave the menu. The screen will show that
there are zones in test.
To view which zones are in test mode, press the zones in test
icon.
Proceed to test the devices.
The panel will show all test events on a separate test screen.
The events will be highlighted blue to
When complete, take the panel out of test mode by selecting
the zone icon. Click the “In” field until it shows enabled.
Press exit and save changes in order to return the panel to
normal.