What to do if Zeversolar Zeverlution 2000S displays Presumable Fault 33?
If your Zeversolar Inverter displays Presumable Fault 33, check the grid frequency and observe how often major fluctuations occur. If this fault is caused by frequent fluctuations, try to modify the operating parameters after informing the grid operator first.
What to do if Zeversolar Inverter displays Presumable Fault 6?
If your Zeversolar Inverter displays Presumable Fault 6, check the open-circuit voltages of the strings to ensure they are below the inverter's maximum DC input voltage. If the input voltage is within the permitted range and the fault persists, it may indicate a broken internal circuit, and you should contact the service.
What to do if Zeversolar Zeverlution 2000S displays Presumable Fault 37?
If your Zeversolar Inverter displays Presumable Fault 37, check the open-circuit voltages of the strings and make sure it is below the maximum DC input voltage of the inverter. If the input voltage is within the permitted range and the fault persists, contact service.
What to do if Zeversolar Zeverlution 2000S displays Presumable Fault 36?
If your Zeversolar Inverter displays Presumable Fault 36, ensure the grounding connection of the inverter is reliable. Then, perform a visual inspection of all PV cables and modules. If the fault persists, contact the service.
What to do if Zeversolar Inverter shows Presumable Fault 38?
If your Zeversolar Inverter is showing Presumable Fault 38, check the PV array’s insulation to ground, ensuring that the insulation resistance to ground is greater than 1 MOhm. Otherwise, visually inspect all PV cables and modules. Also, ensure the grounding connection of the inverter is reliable. If the fault occurs often, contact the service.
What to do if Zeversolar Zeverlution 2000S shows Presumable Fault 41, 42, 43, 44, 45?
If your Zeversolar Inverter is showing Presumable Fault 41, 42, 43, 44, or 45, disconnect the inverter from the grid and the PV arrays, then reconnect them after 3 minutes. If the fault continues to appear, contact the service.
What to do if Zeversolar Inverter shows Permanent Fault 1, 2, 3, 4, 5, 6, 8, 9?
If your Zeversolar Inverter is showing Permanent Fault 1, 2, 3, 4, 5, 6, 8, 9, disconnect the inverter from the utility grid and the PV arrays, and reconnect them after the display and LED turn off. If the fault continues to be displayed, contact the service.
What to do if Zeversolar Zeverlution 2000S Inverter displays Presumable Fault 34?
If your Zeversolar Inverter displays Presumable Fault 34, check the grid voltage and grid connection on the inverter. Also, check the grid voltage at the point of connection of the inverter. If the grid voltage is outside the permissible range due to local grid conditions, try modifying the values of the monitored operational limits after informing the electric utility company first. If the grid voltage is within the permitted range and the fault persists, contact service.
Crucial warnings and precautions to prevent injury, death, or equipment damage.
Specifies environmental requirements and clearance for safe inverter installation.
Guidelines for choosing an appropriate and safe place to install the inverter.
Step-by-step instructions for securing the inverter using the provided wall bracket.
Critical safety measures to follow before and during electrical connections.
Procedures and requirements for connecting the inverter to the AC power grid.
Details cable specifications, requirements, and design for AC grid connection.
Specific requirements and considerations for a secure and compliant grid connection.
Instructions for establishing an additional protective earth connection.
Recommendations for selecting appropriate miniature circuit-breakers for inverter protection.
Prerequisites and guidelines for connecting DC power sources to the inverter.
Detailed steps for correctly assembling the DC connectors for PV array connection.
Instructions for properly connecting the photovoltaic array to the inverter's DC inputs.
Pre-commissioning tests to verify electrical integrity and safety.
Step-by-step guide for initiating inverter operation after installation.
Provides solutions for common faults, error codes, and corrective measures.
General| Model | Zeverlution 2000S |
|---|---|
| Rated Output Power | 2000 W |
| Nominal AC Power | 2000 W |
| Nominal AC Voltage | 230 V |
| Number of MPP Trackers | 1 |
| AC Output Voltage | 230 V |
| AC Output Frequency | 50/60 Hz |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural convection |
| Protection Degree | IP65 |
| MPPT Voltage Range | 90-450 V |
| Max. AC Power | 2200 VA |
To Next Page
