ZIEHL-ABEGG Fcontrol Basic User Manual

8.3 Menu group Info
Info
Info
Frequency
Inverter output frequency.
Motor current
Display of motor current (Metering precision approx. +/-10%)
Modulation
Device modulation
8.4 Controller Setup
Controller Setup
8.4.1 Controlmode
Controlmode
Type of device modulation.
0
Factory setting
Control by external signal (0 - 10 V / PWM) at the input “E1”.
Switching to fixed speed “Default Internal2” or “Default Internal3” via digital input
possible (
IO Setup).
1
no function
2
no function
3
no function
4
constant speed “Set Internal1”.
Switching to fixed speed “Default Internal2” or “Default Internal3” via digital input
possible (
IO Setup).
5
Fixed speed “Default Internal2” (without switching possibility to other default).
6
Fixed speed “Default Internal3” (without switching possibility to other default).
Operating Instructions Fcontrol Basic – model series FSDM2.5..50AM Programming
L-BAL-E174-GB 1704 Index 005 Part.-No.
25/49

ZIEHL-ABEGG Fcontrol Basic Specifications

General

Brand	ZIEHL-ABEGG
Model	Fcontrol Basic
Category	Inverter
Language	English