SW3
GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN) 50/122
USER GUIDE - M0SW3D1905Iv04 - V04 May 2019
FIGURE 27 Rate Control menu configuration page
5.7 QOS CONFIGURATION
The Quality of Service (QoS) permits the traffic classification and service policy and selects
the conditions in which it will be treated by the equipment.
The equipment provides QoS at level 2 (switching). Level 2 QoS is performed on switched
traffic, adjusted to the processing of parameters and behaviour of IEEE 802.1p, with four
internal priority levels. This priority is taken into account for selecting the processing and
transmission order in each switch output interface.