SW3
GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN) 55/122
USER GUIDE - M0SW3D1905Iv04 - V04 May 2019
FIGURE 30 Example of Monitor menu configuration
5.9 LLDP CONFIGURATION
LLDP is a standard protocol of the link layer used to announce identity and capabilities to
neighbouring devices in local area networks.
Both the information transmitted and the information received is accessible through the
SNMP protocol, through the MIBs defined in the LLDP standard itself, and is usually used
to determine the topology of the networks.
To Next Page
Loading...
