SW3
GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN) 98/122
USER GUIDE - M0SW3D1905Iv04 - V04 May 2019
Depending on the function of each command, they can be classified into different groups:
TABLE 3 Classification of commands based on their functions
Information in the log
The events that are generated at the system level and sent to the log include an
identification level.
The system supports 8 different levels, separated into two blocks. The first set corresponds
to unwanted situations, and the second block on information without affecting the
functionality.
In the first block, the values are emerg, alert, crit, err and warning, which represents a
decreasing level of severity in terms of the detected situation.
In the information block, the values are notice, info and debug, without having any
connotation whatsoever for impact.
For more information, see section 5.1.4, Syslog.
To Next Page
Loading...
