SpeedFace M1/M2
User Manual
Page | 22 Copyright©2020ZKTECO CO., LTD. All rights reserved.
1.6.4 Password Verification
The Password Verification mode compares the entered password with the registered User ID and
Password.
Click the button on the main screen to open the 1:1 (One to One) password verification mode.
1. Input the user ID and press [OK].
If an employee registers palm, badge and face in addition to password, and the verification method is set
to Password/Badge/Face/Palm, the following screen will appear. Select the icon to enter the
password verification mode.
To Next Page
Loading...
Need help?
General
