SpeedFace M1/M2
User Manual
Page | 61 Copyright©2020ZKTECO CO., LTD. All rights reserved.
Notes:
1） When the ending time is earlier than the starting time, such as 23:57~23:56, it indicates that access
is prohibited all day; when the ending time is later than the starting time, such as 00:00~23:59, it
indicates that the interval is valid.
2） The effective time period to unlock the door: open all day (00:00~23:59) or when the ending time
is later than the starting time, such as 08:00~23:59.
3） The default time zone 1 indicates that the door is open all day long.
9.3 Holiday Settings
Whenever there is a holiday, you may need a special access time; but changing everyone's access time one
by one is extremely cumbersome, so you can set a holiday access time which applies to all the employees,
and the user will be able to open the door during the holidays.
Click Holidays on the Access Control interface.
Add a New Holiday
Click Add Holiday on the Holidays interface and set the holiday parameters.
To Next Page
Loading...
Need help?
General
