SpeedFace M1/M2
User Manual
Page | 52 Copyright©2020ZKTECO CO., LTD. All rights reserved.
7.3 Bell Schedules
Click Bell Schedules on the Personalize interface.
Add a bell
1. Click New Bell Schedule to enter the adding interface:
Set whether to enable the bell status.
At this time of day, the device automatically rings the bell.
Set the repetition cycle of the bell.
Set the duration of the internal bell. Valid values range from 1 to 999 seconds.
2. Back to the Bell Schedules interface; click All Bell Schedules to view the newly added bell.
Edit a bell
On the All Bell Schedules interface, tap the bell to be edited.
Click Edit, the editing method is the same as the operations of adding a bell.
Delete a bell
On the All Bell Schedules interface, tap the bell to be deleted.
Tap Delete and select [Yes] to delete the bell.
To Next Page
Loading...
Need help?
General
