SpeedFace M1/M2
User Manual
Page | 57 Copyright©2020ZKTECO CO., LTD. All rights reserved.
9 Access Control
Access Control is used to set the schedule of a door opening, locks control and other parameter settings
related to access control.
Click Access Control on the main menu interface.
To gain access, the registered user must meet the following conditions:
1. The current door unlock time should be within any valid time zone of the user time period.
2. The user’s group must be in the door unlock combination (when there are other groups in the
same access combo, verification of members of those groups are also required to unlock the door).
In default settings, new users are allocated into the first group with the default group time zone and
access combo as “1“ and set in an unlocking state.
To Next Page
Loading...
Need help?
General
