ZKTeco SpeedFace M1 User Manual

SpeedFace M1/M2 User Manual
Page | 71 Copyright©2020ZKTECO CO., LTD. All rights reserved.
13.2 Add Device to the Software
You can add a device by searching. The process is as follows:
1） Click Access Control >Device >Search Device, to open the Search interface.
2） Click Search, and it will prompt [Searching……].
3） After searching, the list and the total number of access controllers will be displayed.
4） Click Add to add the specific device to the software.

ZKTeco SpeedFace M1 Specifications

General

Brand	ZKTeco
Model	SpeedFace M1
Category	IP Access Controllers
Language	English