SpeedFace M1/M2
User Manual
Page | 43 Copyright©2020ZKTECO CO., LTD. All rights reserved.
6 System Settings
The System Settings is used to set the related system parameters to optimize the performance of the
device.
Click System on the main menu interface.
6.1 Date and Time
Click Date Time on the System interface.
1. You can manually set date and time and click Confirm to save.
2. Click 24-Hour Time to enable or disable this format and select the date format.
When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored,
but the device date and time cannot be restored.
Note: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1,
2020. After restoring the factory settings, the time of the device will change to 18:30, January 1, 2020.
To Next Page
Loading...
Need help?
General
