SpeedFace M1/M2
User Manual
Page | 40 Copyright©2020ZKTECO CO., LTD. All rights reserved.
5.5 Wiegand Setup
The menu is used to set the Wiegand Input & Output parameters.
Click Wiegand Setup on the Comm. Settings interface.
Wiegand Input
Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits.
Number of bits of Wiegand data.
Pulse Width(us)
The value of the pulse width sent by Wiegand is 100 microseconds by default,
which can be adjusted within the range of 20 to 100 microseconds.
Pulse Interval(us)
The default value is 1000 microseconds, which can be adjusted within the range
of 200 to 20000 microseconds.
Select between the User ID and Badge number.