SpeedFace M1/M2
User Manual
Page | 51 Copyright©2020ZKTECO CO., LTD. All rights reserved.
To select the language of the device.
Menu Screen
Timeout (s)
When there is no operation, and the time exceeds the set value, the device will
automatically go back to the initial interface. You can disable the function or set
the value between 60 and 99999 seconds.
Idle Time To Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show
will be played. It can be disabled, or you may set the value between 3 and 999
seconds.
Slide Show Interval
(s)
This refers to the time interval switching different slide show pictures. The
function can be disabled, or you may set the interval between 3 and 999
seconds.
Idle Time To Sleep
(m)
If you have activated the sleep mode, when there is no operation, the device
will enter the standby mode. Press any key or finger to resume the normal
working mode. You can disable this function or set a value within 1-999
minutes.
To select the main screen style according to your personal preference.
7.2 Voice Settings
Click Voice on the Personalize interface.
Select whether to enable voice prompts during operation.
Select whether to enable keypad sounds.
Adjust the volume of the device; valid value: 0 to 100.
To Next Page
Loading...
Need help?
General
